Acer ALTOS 1100E - Manual (Page 142)

Altos 1100E Series User’s Guide 4-16
Advanced Configuration Options
When you select Advanced Configuration Options, a screen similar to the figure
below appears. Do not change these options unless absolutely necessary.
Arrow keys to move cursor, to select option, to exit ( =default)
Adaptec AHA-3950U2B SCSISelect (TM) Utility
AHA-3950U2B at Bus:Device 01:06h
Configuration
SCSI Bus Interface Definitions
Host Adapter SCSI ID................................ 7
SCSI Parity Checking ................................ Enabled
Host Adapter SCSI Termination................. Low ON/High ON
Additional Options
Boot Device Options .................................. Press
SCSI Device Configuration ........................ Press
Advanced Configuration Options ............... Press
- Reset to Host Adapter Defaults
*
Advanced Configuration Options
Reset SCSI BUS at IC Initialization .............................................................. Enabled
Display Message During BIOS Initialization .................................... Enabled
Extended BIOS Translation for DOS Drives > 1Gbyte .................................. Enabled
Verbose/Silent Mode..................................................................................... Verbose
--------------Options Listed Below Have NO EFFECT if the BIOS is Disabled--------------
Host Adapter BIOS ....................................................................................... Enabled
Support Removable Disks Under BIOS as Fixed Disks................................. Boot Only
BIOS Support for Bootable CD-ROM ............................................................ Enabled
BIOS Support for Int13 Extensions ............................................................... Enabled
Figure 4-9 Advanced Configuration Options Screen
Use the cursor keys ( ↑ ↓ ) to move between options. Press Enter to display a pop-
up menu with a selection of options. Use the cursor keys ( ↑ ↓ ) to select an option,
and press Enter to make your selection.