Acer ALTOS 1100E - Manual (Page 82)

Altos 1100E Series User’s Guide 3-6
3.2.8 IDE Primary Channel Master
This parameter specifies the current configuration of the IDE device connected to
the master port of the primary IDE channel. For information on how to configure
IDE devices, see section 3.4.2.
3.2.9 IDE Primary Channel Slave
This parameter specifies the current configuration of the IDE device connected to
the slave port of the primary IDE channel. For information on how to configure
IDE devices, see section 3.4.2.
3.2.10 IDE Secondary Channel Master
This parameter specifies the current configuration of the IDE device connected to
the master port of the secondary IDE channel. For information on how to configure
IDE devices, see section 3.4.2.
3.2.11 IDE Secondary Channel Slave
This parameter specifies the current configuration of the IDE device connected to
the slave port of the secondary IDE channel. For information on how to configure
IDE devices, see section 3.4.2.
3.2.12 Total Memory
This parameter specifies the total system memory. The memory size is
automatically detected by BIOS during the POST. If you install additional
memory, the system automatically adjusts this parameter to display the new
memory size.
Memory Type
This parameter indicates the type of memory installed in the system.