Acer ALTOS 1100E - Manual (Page 125)

Chapter 3 - BIOS Utility 3-49
3.12 Abort Settings Change
Use this option to disregard your changes to the BIOS and reload your previous
settings.
The following dialog box appears when you select Abort Settings Change from the
main menu.
Do you want to abort settings change?
[Yes] [No]
Select Yes to disregard your changes and reload your previous settings. After
reload, the main menu appears on screen.
Select No to ignore the message and return to the BIOS utility.
3.13 Leaving Setup
Examine the system configuration values. When you are satisfied that all the
values are correct, write them down. Store the recorded values in a safe place. In
the future, if the battery loses power or the CMOS chip is damaged, you will know
what values to enter when you rerun Setup.
Press to leave the system configuration setup. The following screen appears:
Do you really want to exit SETUP?
[Yes] [No]
Use the arrow keys to select your response. Select Yes to store the new data in
CMOS. Select No to retain the old configuration values. Press
.