Acer ALTOS 1100E - Manual (Page 135)

Chapter 4 – SCSISelect Configuration Utility 4-9
Host Adapter SCSI Termination
This option allows you to configure host controller SCSI termination. The
following figure shows the choices available if you have an AHA-3950U2B.
Arrow keys to move cursor, to select option, to exit ( =default)
Adaptec AHA-3950U2B SCSISelect (TM) Utility
AHA-3950U2B at Bus:Device 01:06h
Configuration
SCSI Bus Interface Definitions
Host Adapter SCSI ID................................ 7
SCSI Parity Checking ................................ Enabled
Host Adapter SCSI Termination................. Automatic
Additional Options
Boot Device Options .................................. Press
SCSI Device Configuration ........................ Press
Advanced Configuration Options ............... Press
- Reset to Host Adapter Defaults
*
Automatic
* Enabled
Disabled
Figure 4-6 Host Adapter SCSI Termination Selection for AHA-3950U2B
Use the cursor ( ↑ ↓ ) and Enter keys to make your selection.