Acer ALTOS 1100E - Manual (Page 131)

Chapter 4 – SCSISelect Configuration Utility 4-5
4.2.1 Configure/View Host Adapter Settings Menu
The Configure/View Host Adapter Settings menu lists three settings under SCSI
Bus Interface Definitions and three additional options, as shown below:
• Host Adapter SCSI ID: changes the host controller SCSI ID from its default
value of 7
• SCSI Parity Checking: enables or disables host controller SCSI parity checking
• Host Adapter SCSI Termination: configures host controller SCSI termination
Advanced users can access Boot Device Options, SCSI Device Configuration, and
Advanced Configuration Options through the following menu:
Arrow keys to move cursor, to select option, to exit ( =default)
Adaptec AHA-3950U2B SCSISelect (TM) Utility
You have an AHA-3950U2B SCSI host
adapter in your system. Move the cursor
to the bus:device of the one to be
configured and press .
- Toggle color/monochrome
*
BUS Device
00:00:A
00:00:B
Figure 4-2 Configure/View Host Adapter Settings Screen (1 of 2)