Acer ALTOS 1100E - Manual (Page 145)

Chapter 4 – SCSISelect Configuration Utility 4-19
4.2.2 SCSI Disk Utilities
When you select SCSI Disk Utilities from the Options menu the SCSISelect utility
scans the SCSI bus and lists all SCSI devices installed on the SCSI bus. You will see
a screen similar to the figure below. You can easily determine from this screen
which SCSI ID is assigned to each device on the SCSI bus.
Adaptec AHA-3950U2B SCSISelect (TM) Utility
AHA-3950U2B at Bus:Device 01:06h
Arrow keys to move cursor, to select option, to exit ( =default) *
Select SCSI Disk and press
SCSI ID #0: IBM DNES 39170 LVD
SCSI ID #1: No device
SCSI ID #2: No device
SCSI ID #3: No device
SCSI ID #4: No device
SCSI ID #5: No device
SCSI ID #6: No device
SCSI ID #7: AHA-3950U2B
SCSI ID #8: No device
SCSI ID #9: No device
SCSI ID #10: No device
SCSI ID #11: No device
SCSI ID #12: No device
SCSI ID #13: No device
SCSI ID #14: No device
SCSI ID #15: No device
Figure 4-10 SCSI Disk Utilities Screen for AHA-3950U2B
When you highlight a disk device by moving to it with the cursor keys and press
Enter, a small menu window appears. You then select Format Disk or Verify
Media from this menu.
Use the cursor keys ( ↑ ↓ ) to move between options. Press Enter to display a pop-
up menu with a selection of values. Use the cursor keys ( ↑ ↓ ) to select a value, and
press Enter to make your -selection.