Adjusting analog outputs using serial line, Acal – Vaisala DMT346 User Manual
Page 160
User's Guide _______________________________________________________________________
160 __________________________________________________________________ M210762EN-G
Adjusting Analog Outputs Using Serial
Line
ACAL
Use the serial line to perform the analog output adjustment. Use the
ACAL command and enter the multimeter reading.
Example (current outputs):
>acal
Ch1
I1
(mA) ?
2.046
Ch1
I2
(mA) ?
18.087
Ch2
I1
(mA) ?
2.036
Ch2
I2
(mA) ?
18.071
>
Press the adjustment button on the motherboard inside the transmitter
again to disable the adjustment function.
This manual is related to the following products: