Vaisala DMT346 - Manual (Page 108)

User's Guide _______________________________________________________________________
108 __________________________________________________________________ M210762EN-G
HELP
Use the HELP command to list the currently available commands. The
available commands are determined by the device configuration and
installed options.
Example:
>help
? ACAL ADDR AERR ALSEL
ASEL AUTO AUTOCAL CDATE CLOSE
CON CT CTEXT DATE DELETE
DIR DSEL DSEND ECHO ERRS
FCRH FILT FORM HELP IK0
INTV ITEST LIGHT LOCK MODBUS
MODS MOL MOLI NET PLAY
PRES PUR PURGE R RESET
SCOM SDELAY SEND SMODE SWARM
SYSTEM TEST TIME UNDELETE UNIT
VERS XPRES
>
ERRS
Use the ERRS command to display transmitter error messages, see Table
33 on page 147.
Example (no active errors):
>errs
No errors
>
Example (showing active error):
>errs
Error: E2 Humidity sensor open circuit.
>
MODS
Use the MODS command to display information about the optional
modules that are connected to the transmitter.
Example:
>mods
Module 1 : WLAN-1 (POST: release_82000941_J; FW:
Version 82000977_K1 10/16/2008)
Module 2 : LOGGER-1 (1024 MB; HW: B; SW: 5)
>