Atmel SpaceWire Router SpW-10X - Manual (Page 153)

Ref.: UoD_SpW-10X_
UserManual
Issue: 3.4
SpW-10X
SpaceWire Router
User Manual Date: 11 th
July 2008
Preliminary
153
details throughout document.
Section added on Application Guidelines giving example circuit
diagram and PCB layout guidelines.
Section added on anomalies and warnings.
Section added on Technical Support.
15.6 ISSUE 2.4 TO ISSUE 2.5
Section Ref Change
Update document revision and redistribute
11.1 Change VCC to V
DD
.
11.2 Remove VCC
15.7 ISSUE 2.3 TO ISSUE 2.4
Section Ref Change
Title Change from data sheet to user manual
Title Add Atmel part number as a reference
3.2 External Ports Add depth of external port FIFOs.
5.2 SpaceWire
Signals
Rename data strobe IOs so the naming is consistent in the
document. Note pin names should map to pin names in the
data-sheet therefore use Plus/Minus notation
5.7 Power,
Ground, PLL
and LVDS
Signals
Additional information on power pins and PLL power supply
circuitry.
10.3 Group Adaptive
Routing Table
Add mapping of SpaceWire Ports 1 to 8 and External ports 9
and 10 to the physical interface to the device. Reference to
section 4, pin locations added.
All Move switching and electrical characteristics to end of
document
15.8 ISSUE 2.2 TO ISSUE 2.3
Section Ref Change
SpaceWire pins are ordered 0 to 7
Missing figures updated