Atmel SpaceWire Router SpW-10X - Manual (Page 125)

Ref.: UoD_SpW-10X_
UserManual
Issue: 3.4
SpW-10X
SpaceWire Router
User Manual Date: 11 th
July 2008
Preliminary
125
WARNING
If a SpaceWire port that is being used to configure a router has its transmit clock turned off then it will
not be possible to configure the router using that port. Unless there is another connection with an
active clock and which is not disabled that can be used to perform configuration the router will have to
be reset before it can be configured again.
TXDIV
0 15 8
Not used
1 2 7
Enable clock
16 20
Tx10MbitDIV
21 32
Not used
Figure 9-10 Transmit clock control register