Spw-10x spacewire router, User manual, Preliminary – Atmel SpaceWire Router SpW-10X User Manual
Page 122: 6 device manufacturer and chip id register
Ref.: UoD_SpW-10X_
UserManual
Issue: 3.4
SpW-10X
SpaceWire Router
User Manual
Date: 11
th
July 2008
Preliminary
122
Table 9-12 Time-Code Register Fields
Bits Name
Reset
Value
Description
Read/Write
5:0
Time Value
All bits set to zero
6-bit time-code value
R
7:6
Time-Code Flags
“00”
Two time-code flags
R
31:8
Not used
All bits set to zero
R
9.5.6 Device Manufacturer and Chip ID Register
The device manufacturer and chip ID register address is 261 (0x0000 0105).
This register contains three eight-bit fields which hold a device manufacturer identity, chip identity and
version number. The fields of the device manufacturer and chip ID register are shown in Figure 9-8
and described in Table 9-13.
Version number
31
Chip ID code
Manufacturer Code
24 23
16 15
8
7
0
Not used
Figure 9-8 Device Manufacturer and Chip ID Register Fields
Table 9-13 Device Manufacturer and Chip ID Register Fields
Bits Name
Reset
Value
Description
Read/Write
7:0 Version
Number
Version Number of
chip design
Version number of the chip design
R
15:8
Chip ID Code
Chip type
Identity code for the SpaceWire chip
from the particular manufacturer
R
23:16 Manufacturer
Code
Manufacturer identity
code
Manufacturer identity code
“00000000” = Unknown Manufacturer
“00000001” = University of Dundee
R
31:24 Not used
All bits set to zero
R