Atmel SpaceWire Router SpW-10X - Manual (Page 152)

Ref.: UoD_SpW-10X_
UserManual
Issue: 3.4
SpW-10X
SpaceWire Router
User Manual Date: 11 th
July 2008
Preliminary
152
5.7.4 VCO bias resistor value corrected (Section 5.7.4).
8.1.5 Tri-state mode changed to deactivate mode. Calculation of
deactivated power consumption added.
9.4.3 Table 9-6 Tri-state mode changed to deactivated mode.
9.5.8 Description for ‘time-code flag mode bit’ added.
11.1 Table 11-1 Power information updated.
11.3 Section added on reliability information
13.1 Reference to further details on anomaly 1 in section 13.3
added.
Anomaly 2 (tri-state mode) removed. The text throughout the
document related to tri-state mode has been corrected to
deactivated mode. A warning that the deactivated mode is not
true tri-state has been added.
13.3 Section added to give more details on reset anomaly.
15.4 ISSUE 3.0 TO ISSUE 3.1
Section Ref Change
5.6 Second warning clarified.
7.6.10 Note added explaining that command packet fill bytes is a
feature of the SpW-10X and not of RMAP.
8.1.6
13.2 Warning on setting data rate to less than 2 Mbits/s deleted.
The SpW-10X device will not allow a TXDIV and TXRATE to be
set to give a transmit data rate below 2 Mbits/s.
8.3.2.4 Note added to further explain blocking of low priority packets by
high priority ones.
8.3.5.3 Corrections made. When output port not running or in a group
and not running, the router will waits for the timeout period for
the link to start. If it does not start in that time then the packet
will be spilt.
11.1 References to [AD3] corrected.
12.1 Example schematic changed to a format that is readable.
15.5 ISSUE 2.5 TO ISSUE 3.0
Section Ref Change
Entire
document
Major edit providing clarifications and additional application