Atmel SpaceWire Router SpW-10X - Manual (Page 151)

Ref.: UoD_SpW-10X_
UserManual
Issue: 3.4
SpW-10X
SpaceWire Router
User Manual Date: 11 th
July 2008
Preliminary
151
15. DOCUMENT CHANGES
15.1 ISSUE 3.3 TO ISSUE 3.4
Section Ref Change
13.1
13.4 Parity error anomaly added to the list of anomalies.
Details of parity error anomaly added.
6.4
10.1
10.2
10.3
10.4
10.5
11.1 Update after characterisation tests of the SpW-10X prototypes:
Corrected STATMUXOUT input valid time after reset
Clock and Reset switching characteristics added
DS skew parameter changed to total Tx skew & jitter
External port timing added
Time code interface timing completed / corrected
Error / Status interface timing added
Power consumption parameters updated
15.2 ISSUE 3.2 TO ISSUE 3.3
Section Ref Change
1.2 Table 1-2 RD3 changed to more appropriate reference document that
includes information on LVDS.
8.1.5 Figure 8-3 Bias resistor value corrected to 20k ohms.
9.3 Table 9-3 The reset values of the GAR bits are undefined after power on
and unchanged after reset except the Invalid Address bit which
is 1 after power on or reset.
12.2.6 Point 1 Editorial change to text.
12.2.6 Point 5 Editorial change to text.
14 Correction made to support email address.
15.3 ISSUE 3.1 TO ISSUE 3.2
Section Ref Change
1.2 Table 1-2 RD3 added “Atmel MH1RT Cold Sparing I/O Buffers”.
3 Figure 3.1 Text in diagram change from “non-blocking crossbar switch” to
“crossbar switch”.
3.5 Explanation of “non-blocking” nature of crossbar switch added.
5.1.2 Sentence added explaining that LVDS inputs and output are
cold sparing and giving reference to RD3.