AirSep MN167-1 - Manual (Page 228)

EN FreeStyle 5™
EN-32 AirSep
®
Corporation
MN167-1 rev. – 02/13
Cleaning, Care, and Proper Maintenance
Cabinet
Turn off the FreeStyle 5 unit, and disconnect the power cord from
FreeStyle 5 before you clean the cabinet.
Do not use liquid directly on the FreeStyle 5 unit to clean it. A list of
undesirable chemical agents includes but is not limited to, the
following, according to the plastics manufacturer: alcohol and
alcohol-based products, concentrated chlorine-based products
(ethylene chloride), and oil-based products (Pine-Sol, Lestoil). These
are NOT to be used to clean the plastic housing on FreeStyle 5, as
they can damage the unit’s plastic.
Replace the disposable cannula as recommended by the
manufacturer or your equipment provider. Additional supplies are
available from your Equipment Provider.
Keep the FreeStyle 5 unit clean and free from moisture and dust.
Clean the plastic housing periodically by wiping with a lint-free cloth or
with a mild household cleaner applied with a damp cloth or sponge.
Pay special attention to the oxygen outlet for the cannula connection
to make sure it remains free of dust, water, and particles.
To prevent a voided AirSep warranty, follow all manufacturers’
instructions.