AirSep MN188-1 User Manual
AirSep Health and hygiene
MN188-1
Rev -
Tools Required:
•
11/16”Wrench
•
5/8” Wrench
To Attach the Extension Adapter:
Attach the humidifier extension adapter (P/N HU002-1) to the O2 outlet of the
concentrator by hand tightening the nut fitting clockwise onto the O2 outlet of
the concentrator (see figure 1). Using the 5/8” wrench on the O2 outlet and the
11/16” on the adapter nut, tighten the adapter nut until snug (see figure 2). Do
not over tighten.
Figure 1
Figure 2
To Remove the Extension Adapter:
To remove the humidifier extension adapter, use the 5/8” wrench on the O2
outlet and the 11/16” on the adapter nut, turn the chrome adapter nut counter
clockwise until loose and then remove by hand.
PDF created with pdfFactory Pro trial version
See also other documents in the category AirSep Health and hygiene:
- MN170-1 D (40 pages)
- MN172-1 (502 pages)
- MN189-1 (12 pages)
- MN123-1 F (45 pages)
- MN131-1 B (556 pages)
- MN166-1 B (40 pages)
- MN167-1 (520 pages)
- MN168-1 (3 pages)
- MN169-1 (40 pages)
- MN092-1 D (13 pages)
- MN104-1 D (40 pages)
- MN112-1 (208 pages)
- MN119-1 D (4 pages)
- MN120-1 (44 pages)
- MN078-1 F (42 pages)
- MN084-1 D (137 pages)
- MN139-1 (144 pages)
- MN164-1 (30 pages)
- MN152-1 (18 pages)
- MN136-1 H (27 pages)
- MN137-1 D (190 pages)
- MN156-1 B (18 pages)
- MN157-1 B (332 pages)
- MN165-1 G (28 pages)
- MN175-1 (2 pages)
- 15062781 (16 pages)
- 4111-7 (95 pages)
- 20626704 (24 pages)
- 20626704-C1 (154 pages)
- ML-CONC0056 (2 pages)
- MN028-1 (1 page)
- MN171-1 (23 pages)
- MN083-1 (1 page)
- MN126-1 C (69 pages)
- MN179-1 B (62 pages)
- MN110-1 (30 pages)
- MN105-1 C (52 pages)
- MN118-1 B (40 pages)
- MN134-1 B (40 pages)
- MN151-1 (1 page)
- MN188-2 (2 pages)
- MN155-1 (16 pages)
- MN138-1 H (46 pages)
- MN178-1 (1 page)