AirSep MN167-1 - Manual (Page 216)

EN FreeStyle 5™
EN-20 AirSep
®
Corporation
MN167-1 rev. – 02/13
---- [Read the Important Safety Rules section before
operating this equipment.] ----
Nasal Cannula
A nasal cannula and tubing are used to deliver oxygen from the FreeStyle 5 unit
to the user. The tubing is connected to the unit’s oxygen outlet (See Figure 10).
Figure 10: Connecting Cannula to FreeStyle 5’s Oxygen Outlet
AirSep recommends a nasal cannula with 7 ft (2.1 m) of tubing, AirSep Part No.
CU002-1. Other lengths of tubing up to 25 ft (7.6 m) maximum, including nasal
cannula, may be used.
Replace the disposable cannula periodically following normal
usage. Additional supplies are available from your Equipment
Provider.
Cannula tubing must be non-kinking, which can be used for a total
length of up to 25 ft (7.6 m) maximum.
Always follow the cannula manufacturer’s instructions for proper
use. Consult your licensed health care provider to determine how
often the cannula should be replaced.