Ag Leader GPS 3100 Operators Manual - Manual (Page 14)

General Instructions Add-On GPS 3000/3050/3100
Ag Leader Technology
June 2001 Rev. 1 3000124 12
BEACON SETUP
Mode: Manual
Channel 0 Frequency 300.0
Channel 1 Frequency 300.0
ACCEPT EXIT
Figure 4. Manual Setting
5 If you are setting to Manual (Figure 4) push ACCEPT key then
use down arrow key to scroll to Channel 0 Frequency and
press EDIT key. Use the up or down arrow key to set desired
frequency and press ACCEPT key. Scroll down to Channel 1
Frequency and press EDIT key. Use up or down arrow keys to
set desired frequency and press ACCEPT key.
6 Press the EXIT key two times to return to operating screen.
Age of Differential Age of Differential is the delay setting used to continue logging data if
Beacon or Satellite reception is lost.
Step Action
1 At the GPS SETUP screen (Figure 5) scroll down to Satellite
Differential Mode with down arrow key and press EDIT.
2 Scroll down to Age of Differential and press EDIT.
3 Use the UP or DOWN ARROW keys to set the time.
NOTE: If you are using Trimble firmware below
version 1.50 you will be able to set the delay up to 90
seconds. If you are using version 1.50 or greater the
value may be set as high as 250 seconds.