Ag Leader Compass Manual - Manual (Page 26)

18 Firmware Version 5.4
Unlocking Features
The Features Tab is where you can enter unlock
codes. Unlock codes are unique to the serial number
of each display and the feature registration number.
You must supply these numbers to your dealer when
purchasing any unlock codes. Press to enter
the unlock code and press to enable the
feature.
Note: Once a feature is unlocked, that feature remains with that display and cannot be transferred to another.
A
DVANCED TAB
Press: Home button > Display button > Advanced tab
The Advanced Tab allows you to specify settings for
copying log files; specify Key Switch Standby settings;
view and manually upgrade module firmware; and
create and restore backup files.
CAUTION: The Export Diagnostic Files, Advanced Parameters, Copy Debug Files, Clear Debug Files
and Service Mode functionality on the Advanced Tab is reserved for use by the manufacturer. DO NOT
change any of these settings without specific instruction from the manufacturer.
• Key Switch Standby
This setting allows the display to remain powered up after the vehicle power has been shut down. Instead,
the display will switch into standby mode and will appear to be shut off; however the power light will change
to an amber color. Pressing the touchscreen while it is in standby mode will immediately turn the screen
back on again.
Use / to specify a length of time that you wish the display to remain powered up in standby
mode after the vehicle power has been shut down.
Note: When the time you specified in Key Switch Standby is nearly expired, then the amber-colored power
light will flash on and off immediately preceding shutdown. If you wish the display to remain powered up for a
longer period of time, touch the display to restart the Key Switch Standby countdown.
Features Advanced
Console Setup
General
Feature
Virtual Terminal
Status
Enabled
Feature Description:
Unlock
Display
Advanced
Display Features Advanced
Console Setup
General
Log Files Key Switch Standby
5
About
Memory Guidance
Export
Diagnostic Files
Restore
Backup
Create
Backup
Advanced
Parameters
Copy
Debug Files
Clear
Debug Files
Clear Internal
Memory
Remove
Patterns
Memory
Test
Service
Mode
View Module
Firmware