HP StorageWorks DAT 72x10 Tape Autoloader - Manual (Page 35)

4 Autoloader administration
Autoloader home screen
Four menu options are accessed through the operator control panel by using the Previous and Next
buttons:
• Status/Information , page 36
• Configuration , page 39
• Operations , page 41
• Support , page 46
The second line of the home screen displays a brief status of the drives. Status definitions are listed
in Table 9 .
Table 9 Drive status
Status Definition
IDLE Drive has a cartridge inserted, but there is no activity
READY Drive has no cartridge
READ Drive is reading
WRITE Drive is writing
CLEAN Drive is cleaning
WARN Drive is in a warning condition such as cleaning required
ERROR Drive is in an error condition. This status is displayed until the autoloader is able to
display the detailed error message on the OCP
REWIND Drive is rewinding
SEEK Drive is seeking
ERASE Drive is erasing
LOAD Drive is loading a cartridge
UNLOAD Drive is unloading a cartridge
CALIBRATE Drive is calibrating
UPDATE Drive is upgrading
DAT 72x10 1U Tape Autoloader 35