Installing drivers on unix, Installing drivers on ia64, Upgrading backup software – HP StorageWorks DAT 72x10 Tape Autoloader User Manual
Page 16
Installing drivers on UNIX
The recommended backup applications use the operating system’s standard, built-in device drivers. To
upgrade drivers we recommend that you patch to the latest version of the operating system or configure
device files, as described in the UNIX Configuration Guide on the CD-ROM.
NOTE:
The
UNIX Configuration Guide
also describes how to install and verify installation on Linux.
Installing drivers on IA64
If you are installing on an IA64 system, such as an HP Integrity server, check
www.hp.com/go/connect
for the latest information on the availability of backup application upgrades and drivers.
Upgrading backup software
It is important to check
www.hp.com/go/connect
for software compatibility and install any recommended
upgrades.
For optimum performance it is important to use a backup application that is appropriate for your system’s
configuration. In a direct attach configuration, where the autoloader is attached to a standalone server,
you can use backup software that is designed for a single server environment. In network configurations
you will need backup software that supports enterprise environments. HP, Symantec, Legato, Yosemite
and Computer Associates all provide suitable products. Further details about these and other products
that may be appropriate can be found on our connectivity web site.
1.
Go to our connectivity web site:
www.hp.com/go/connect
and select tape backup.
2.
Select software compatibility.
3.
Select your combination of operating system and tape autoloader model in the table. A list of
supported backup applications is displayed. This will also tell you whether your configuration is
compatible with HP One-Button Disaster Recovery, HP OBDR. (All HP StorageWorks DAT tape
autoloaders support HP OBDR. However, you can only use this feature if your system configuration
and backup application also support it. See “
4.
Make sure you have a backup application that supports HP StorageWorks DAT tape autoloaders
and download any upgrades or patches, if required.
16
The HP StorageWorks DAT 72x10 1U Tape Autoloader