HP Systems Insight Manager - Manual (Page 180)

E Default system tasks
Polling tasks track the health status of systems in associated collections. Hardware status polling
must occur periodically to determine when systems go offline or when hardware degrades. You
can customize polling tasks for specific systems to run at scheduled times. You can also create
polling tasks with different collections to meet your needs.
You can configure polling tasks to take place based on the receipt of an event. Event polling tasks
are associated with event collections. For example, you might set up a hardware status polling
task for when traps are received from a system.
When a polling task is set up to run as the result of a change in an event collection, the polling
task is applied to all systems generating events that match the given collection.
NOTE: HP does not recommend scheduling a polling task based on periodic event collection.
The task would run on the set of systems for each event in the associated collection.
NOTE: If you remove a hardware status polling task, systems continue to be discovered, but the
status on them is not updated. If you remove the Daily System Identification task, you would no
longer detect changes in management on systems.
The following default tasks are available on the View All Scheduled Tasks page:
•
Use this task to collect data. This task runs on all systems in the Data Collection List collection.
The default schedule sets the task to run every other Saturday at noon.
•
Use this task to gather information about systems such as networking systems. By default, this
task runs once a day. The information is identified and stored in the database.
•
Single Sign On and STE support on a managed system
•
Type of management protocol on the system (HTTP, SNMP, and WBEM)
•
Type and subtype of system (server, storage, switch, router, and so on)
•
Product name of the system
•
Operating system name and version
•
Web Agents running on the system
•
Web-based software running on the system (for example, printer management software)
•
System associations with management processors (for example, a system and its Remove
Insight board)
•
Storage proxies and related storage systems
•
Wake-on-LAN information
•
Includes events that are transient and happen frequently, but do not generally indicate hardware
failures. For example, link up, link down, and authentication events. These events fill the event
database tables, but do not add value to the hardware event history.
•
This task deletes events older than 90 days and can help maintain Systems Insight Manager
by limiting the total number of events. By default, this task is disabled. To enable the task:
On the All Scheduled Taskspage, click Enable.
In some installations there might be high volumes of events. If so, consider using this task and
event collections as models and creating an event collection for events older than 30 days
(for example), and then creating a task to delete events older than 30 days.
•
This task collects status information through management protocols (SNMP, WBEM, and so
on) for systems that are not Server, Cluster, or Management Processor type. By default, this
task polls every 10 minutes and at start-up.
180 Default system tasks