HP Deskjet 6540 Color Inkjet Printer - Manual (Page 58)

1. Open the Printer Properties dialog box.
2. Click the Paper/Quality tab, and then specify the following print settings:
• Size is : The appropriate card size
• Source is : Upper tray
• Type is : The appropriate card type
3. Select any other print settings that you want, and then click OK.
Use the What's This? help to learn about the features that you see in the Printer
Properties dialog box.
6.2.8 Transparencies (HP Deskjet 6540-50 series)
Guidelines
• For great results, use HP Premium Inkjet Transparency Film.
• Do not exceed the In tray capacity: up to 30 transparencies.
Preparing to print
1. Verify that the printer is turned on.
2. Raise the Out tray, and then remove all paper from the In tray.
3. Slide the paper-width guide all the way to the left, then pull out the paper-length
guide.
4. Place the transparencies in the In tray, with the side to printed on facing down
and the adhesive strip facing up and toward the printer.
5. Carefully push the transparencies into the printer until they stop so that none
of the adhesive strips catch on one another.
6. Slide the paper guides firmly against the paper.
7. Lower the Out tray.
Printing
1. Open the Printer Properties dialog box.
HP Deskjet 6500 series printers
58