HP StorageWorks XP Remote Web Console Software User Manual
Page 58
Description
Item
Licensed capacities are calculated assuming that 1 KB = 1,024 bytes, 1 MB = 1,024
KB, 1 GB = 1,024 MB, and 1 TB = 1,024 GB.
The number of days that remain before the expiration of a temporary key, an emergency
key, or a term key. After the temporary key has expired, the number of days that remain
before you can re-install the temporary key is displayed.
Term (days)
The current status of an option:
Status
•
Installed: The option is available. The Product Name column displays the Installed
icon (
).
•
Installed (Disable): Installation is complete, but the license is set to disable. The Product
Name column displays the Not Installed icon (
).
This status might be displayed if an error occurs after you install options. Resolve the
error and enable the license.
•
Not Installed: The option is not available. The Product Name column displays the Not
Installed icon (
).
•
Not Enough: Installation is complete, but the license capacity is insufficient. This status
is also displayed when the license key of this program product is installed but the
license key of the prerequisite program product is expired. The Product Name column
displays the Not Installed icon (
).
Not Enough might remain displayed when the licensed capacity exceeds the mounted
capacity after you reduce the number of hard disk drives, or when the licensed capacity
exceeds the used capacity after you delete pairs or pools. In these cases, you can
install the available program products by following the procedure in
.
•
Capacity Insufficient: The licensed capacity is insufficient because hard disk drives
are added or pairs have been created by a program product such as XP Continuous
Access. The license expires in 30 days. The Product Name column displays the Installed
icon (
). Purchase the license before the license key expires.
Capacity Insufficient might remain displayed when the licensed capacity exceeds the
mounted capacity after you reduce the number of hard disk drives, or when the
licensed capacity exceeds the used capacity after you delete pairs or pools. In these
cases, you can install the available program products by following the procedure in
“Enabling Options Automatically” (page 98)
.
•
Time Out: The term has already expired for the temporary key. The Product Name
column displays the Not Installed icon (
). When the status is Time Out, you cannot
re-install the temporary key.
explains the status and icons on the License Key list.
Table 23 License Key Status and Icons
Status
Term
(days)
Permitted
Volume
Key Type
Product
Name
1
Icon
License Key Status
Not Installed
–
–
Not
Installed
Option
name
(Not
Installed)
Not installed.
Installed
–
Unlimited or
X TB
2
Permanent
Option
name
(Installed)
Installed with the Permanent
key.
Installed
3
Unlimited or
X TB
2
Term
Option
name
(Installed)
Installed with the Term key and
set to enable.
58
Using the Remote Web Console GUI