HP Multi-Site Traffic Director sa9200 - Manual (Page 90)

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide
84
dbpr Displays information on the active configuration down to the
agent VIP level. This command is useful for assessing the
effectiveness of the current balancing settings. Options consist of
a hyphen and letter followed by a user-specified parameter or
parameters.
Syntax:
dbpr [host | agent | flash] {options}
where:
host specifies that the command is to display information from
a specified host.
agent specifies that the command is to display information
from a specified agent.
flash specifies that the command is to display flash latency
information between peers.
Options:
-a agent_ip agent_port limits the display output to
information related to the load balancer identified by agent_ip
and agent_port.
-h hostname limits display output to information related to the
host identified by hostname. Used together with the "-a" option,
the "-h" option limits the display information to a specific service
on the specified load balancer.
-z zonename limits display output to information related to
hosts within zonename. This option is ignored if combined with
the "-h" option. Combining this option with the "-a" option
constrains the display information to specific service(s) on the
specified load balancer.
-f overrides the default display limit of statistics and metrics
only. Additional information displayed when "-f" is used includes
weight, factor, TTL, and authority records.
-v vip_ip_address limits output to information relating to
VIPs with an IP address of ip_address. This option can be
combined with the "-a", "-h", and "-z" options to display
information related to a narrow subset of VIPs or even a single
VIP. For example:
dbpr host -v 10.234.2.2 -h www.foo-ex.com -a
10.168.16.3 1999
Command Description
Global & CLI System Commands