HP Multi-Site Traffic Director sa9200 - Manual (Page 68)

C H A P T E R 5 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide
62
info Displays the current boot configuration.
Example:
monitor>info
Current active configuration
----------------------------
Product: HP_SA9200
Version: 3.0
Patch Level: 0.0
Build: D18
----------------------------
Current time: Thu Mar 31 12:04:39 2000
Current Config: default.cfg
Hostname: www
Using DHCP: No
IP Address: 10.1.1.11
Netmask: 255.255.254.0
Default Route: 10.1.1.1
Domain: xyz-ex.com
Primary nameserver: 10.1.1.10
NIC setup: auto
Autoboot: Enabled
Boot timeout: 5 (seconds)
ip Specifies the IP address of the SA9200.
Example:
monitor>ip
Enter IP address [10.1.1.11] --->10.1.1.111
load Loads a previously saved configuration file into memory.
Example:
monitor>load
Do you want to load a saved configuration? [n] --->y
Configuration file name? [savedcnfg.cfg] --->
Configuration loaded: savedcnfg.cfg
netmask Specifies the netmask.
Example:
monitor>netmask
Enter Netmask [255.255.254.0] --->255.255.254.0
Command Description
Boot Monitor Command Reference