HP Multi-Site Traffic Director sa9200 - Manual (Page 105)

C H A P T E R 6 System Commands
99
Config Sys SNMP Commands
config sys wizard Changes the prompt level to the config sys wizard branch.
info Displays information about whether the Wizard is enabled or
disabled. By default, Wizard is enabled.
enable Enables the Quick Start Wizard. The Quick Start Wizard is an
automated, interactive method to configure the SA9200. It is
available only through the serial port if enabled after Boot
Monitor.
disable Disables the Quick Start Wizard.
Command Description
Config Sys Commands
Command Description
config sys snmp Changes the prompt level to config sys snmp .
info Displays information about SNMP agent port, sysContact,
sysName, sysLocation and auto-topology
port Allows you to specify the port on which the SA9200 receives
SNMP requests.
Syntax:
config sys snmp port
where agentport is a number between 5020 and 65535 (the
default is 161)
auto-topology Enables or disables operation of the auto-topology protocol. The
default is
disable .
Syntax:
config sys snmp auto-topology [enable|disable]
sysContact Allows you to specify a value for the MIB-II variable sysContact.
The default is null.
Syntax:
config sys snmp sysContact
where string is a string of displayable characters.
Config Sys SNMP Commands