HP Multi-Site Traffic Director sa9200 - Manual (Page 137)

C H A P T E R 6 DNS Commands
131
aliasing Enables or disables IP aliasing. The show dns flash info
command displays whether aliasing is enabled or disabled.
max-delay Sets the maximum time delayed before a response is returned,
setting the maximum tolerated network latency between peer
Flash agents. Default value is 5000ms. Range is 0 to 30,000ms.
Syntax:
config dns flash max-delay
poll-interval Specifies the interval, in seconds, at which a Flash agent polls its
peer agents to determine the network latency to each peer. Default
value is 10 seconds. Range is 1 to 255.
Syntax:
config dns flash poll-interval
num-polls Defines the number of data points involved in calculating the
average network latency to a Flash agent. Each data point is the
result of one completed poll. The default value is 100. Range is
10 to 255.
Syntax:
config dns flash num-polls
drop-miss Specifies the number of consecutive missed poll responses
allowed before a flash peer is marked “unavailable”.
Command Description
Config DNS Flash Commands