HP Multi-Site Traffic Director sa9200 - Manual (Page 176)

A P P E N D I X A HP Multi-Site Traffic Director Server Appliance SA9200 User Guide
170
NCA (Network Configuration Application)
This process is in charge of connecting to and talking to the agents
resident on an HP Traffic Director. It also connects to and talks to the
dns server and the backed process. It is the NCA that updates
configuration information of the dns server every time user types a
commit command.
Some of the messages that are logged by the NCA are:
Aug 2 12:13:27 madagascar NCA: NCA has
started.
This message is displayed when NCA tries to establish connection to
an agent on the specified port.
Aug 2 12:13:27 madagascar NCA: Connection
established to address 10.168.16.3 on port
1999.
When connection to an agent fails the following message is
displayed.
Aug 3 01:27:23 fox NCA: >>> Error: Connection
to address 10.168.16.27 on port 2037 has
failed.
Other major errors include the following:
This message is displayed when a socket connection failed to
establish. The “code” is an internal error code.
Aug 3 01:27:23 fox NCA: >>> Error: Failed to
establish 10.168.16.3 on port 2000, code: 61.
This message is displayed when NCA process could not allocate
memory for its internal use.
Aug 3 01:27:23 fox NCA: >>> Error: could not
allocate memory. Bytes requested: 1024.
Log messages are also generated when switching between primary
and secondary mode, and when getting new configuration from the
primary SA9200.
BACKEND Process
This process is the bridge between the front end CLI command
handler and the DNS server. All information goes through backend.
Backend writes to the log only on two occasions.
When the process is started / restarted
Aug 2 12:13:32 madagascar WDOG: SA9200 Backend
started