HP Multi-Site Traffic Director sa9200 - Manual (Page 106)

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide
100
sysLocation Allows you to specify a value for the MIB-II variable
sysLocation. The default is null.
Syntax:
config sys snmp sysLocation
where system location is a string of displayable characters.
sysName Allows you to specify a value for the MIB-II variable sysName .
The default is the hostname of the SA9200.
Syntax:
config sys snmp sysName
where system location is a string of displayable characters.
community info Displays the community strings the SA9200 is configured to
accept, such as Community (name), IP address, and Rights.
Rights are
ro (read-only) and rw (read-write).
community create Specifies community strings that the SA9200 accepts on
incoming SNMP requests. Up to 10 community strings can be
created.
Syntax:
config sys snmp community create ip [
address>|any] rights [ro|rw]
where string is the name of the community you wish to create,
ip address is the IP address of the host from which you
accept this community string. If any is specified, the community
string is accepted on requests from any IP address. ro means the
community string has read-only privilege. rw means the
community string has read-write privilege. The default
community strings are
public any ro and private any
rw .
community delete Deletes a community string that the SA9200 can accept on
incoming SNMP requests.
Syntax:
config sys snmp community delete ip [
address> | any]
where: string is the name of the community string you wish to
delete, and ip address is the IP address of the host from
which you do not accept this community string. If any is
specified, the community string does not accept requests from any
IP address.
Command Description
Config Sys SNMP Commands