HP Multi-Site Traffic Director sa9200 - Manual (Page 102)

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide
96
ntp create
NOTE: If you selected
Flash load balancing in the
Quick Start Wizard, you
need to configure NTP.
Adds an NTP server.
Syntax:
ntp create
where:
ntpserver is the fully qualified hostname or the IP address of
the Network Time Protocol Server.
ntp delete Deletes an NTP server.
Syntax:
ntp delete
where:
ntpserver is the fully qualified hostname or the IP address of
the Network Time Protocol Server.
ntp info Displays information about any configured NTP servers.
config sys software Changes the prompt level to config sys software .
info Displays all images that have been installed in the SA9200. This
includes the index number, the product name, the version number,
the patch number, the build number and the word “Running” next
to the image that is currently active on the SA9200.
For example:
Index Product Version Patch Build
----- ------- ------- ----- -----
1 HP_SA9200 3.1 0.0 D3 Running
2 HP_SA9200 3.0 0.1 D6
Command Description
Config Sys Commands