HP Multi-Site Traffic Director sa9200 User Manual
Page 114
C H A P T E R 6
HP Multi-Site Traffic Director Server Appliance SA9200 User Guide
108
metrics
Displays metric information for the specified agent.
Syntax:
config dns agents
where:
agentname
is the name of the agent whose metrics you want to
display.
Information displayed:
•
Agent name
•
Agent Version Number (software version)
•
Agent State
•
CPU Utilization
•
Average Connections per Second (average established with
this agent)
•
Any services and their respective statistics (IP address, port,
referrals, etc.).
Example:
Agent: 10.1.1.1 (Version Unknown)
State: Connected CPU Util: 0% Connections/Sec: 0
Service: 10.5.5.5:90 (0 Servers)
Referrals: 0 Flash Referrals: 0
Response Time: 0 Connections/Sec: 0
enable
Enables communication with the agent. Default: enabled.
disable
Disables the agent. Services configured under these agents are no
longer available for resolution.
agent-ip
Configures the IP address of the corresponding agent name.
Syntax:
config dns agents
agent-port
NOTE: If the default value
is changed, ensure that the
agent is listening on the
port number that is
configured in order to
establish a successful
connection.
Sets or change the TCP port number which is used to establish
connection to the agent.
Syntax:
config dns agents
where:
port#
is the TCP port number. Default is 1999
Command
Description
Config DNS Agents Commands