HP Multi-Site Traffic Director sa9200 - Manual (Page 139)

C H A P T E R 6 Show Commands
133
stats all Displays the DNS Statistics (see stats command for
definitions), and all SA9200 information for all configured
Agents, Services, ISV Groups, Zones, Hosts, and Flash
Information.
status If the SA9200 is a primary, it displays the secondary SA9200s to
which it is currently connected. If the SA9200 is a secondary, it
displays the connection status to its primary.
flash info Displays flash information, including whether flash aliasing is on
or off. See
config dns flash spoof for information.
Flash Information:
Flash State: Disabled Aliasing: Disabled
Polling Interval: 10 Number of Polls: 100
Max Broadcast Delay: 500 Drop Misses: 3
Aliasing: With multiple SA9200s, Flash responses can pass
through a firewall because of the aliasing of source IPs.
Polling Interval: How frequently Flash Peers are polled to
determine the network latency
Number of Polls: The number of Flash Peer polls to be used in
calculating the average network latency between Flash Peers. The
more polls, the slower the SA9200 reacts to bursts of network
congestion; but it is also slower to recover from long periods of
congestion.
Max Broadcast Delay: The maximum amount of time that a
DNS response can be delayed to compensate for network latency
between Flash Peers. If exceeded, may become out of sync with
other peers.
Drop Misses: The number of consecutive chances allowed for a
response (to a poll message) before the peer SA9200 is
considered unavailable.
show dns agents Changes the prompt to the show dns agents command level.
Command Description
Show Commands