HP Multi-Site Traffic Director sa9200 - Manual (Page 27)

C H A P T E R 3 Custom/Manual Configuration
21
HP SA9200/config/dns/zones/somedomain.xyz-
ex.com# info
Zone: somedomain.xyz-ex.com
Authority Records TTL: 7200
Authority Name: ns1.xyz-ex.com
Authority IP: 10.54.67.2
Authority Name: ns2.xyz-ex.com
Authority IP: 10.100.68.2
Creating
Hosts Next, the hostname www.somedomain.xyz-ex.com is created:
HP SA9200/config/dns/zones/somedomain.xyz-
ex.com# hostnames create www
Create Hostname Successful
The next step is to map the services www.somedomain.xyz-ex.com to
the load balancer. The following assumes the IP addresses of the load
balancer to be 10.54.67.4 (service 10.54.67.5:80) and 10.100.68.4
(service 10.100.68.5:80), and that the agents are enabled and running
on the default port 1999. (Agents are enabled or disabled using the
CLI of an HP Traffic Director, with the command,
config sys
multisite .) It is assumed that the agent
names are the same as their IP addresses.
HP SA9200/config/dns/zones/somedomain.xyz-
ex.com# hostnames www siteservices
HP SA9200/config/dns/zones/somedomain.xyz-
ex.com/hostnames/www/siteservices# map
lb1:10.54.67.5:80
Site Service Mapped
HP SA9200/config/dns/zones/somedomain.xyz-
ex.com/hostnames/www/vips# map
lb2:10.100.68.5:80
Site Service Mapped