Front-panel error messages, Appendix d front-panel error messages, D front-panel error messages – HP Designjet Z6200 Photo Printer User Manual
Page 207: Error messages
D Front-panel error messages
Under certain circumstances, a front-panel error message appears. Follow the advice in the
Recommendation column to resolve the error.
If an error message appears on the front panel that is not included in this list, and you are in doubt
over the correct response, contact HP Support. See
Table D-1
Text messages
Message
Recommendation
[Color] cartridge has expired
Replace the cartridge. See
Remove an ink cartridge on page 60
and
Insert an ink cartridge on page 62
.
[Color] cartridge is missing
Insert a cartridge of the correct color. See
.
[Color] printhead #[n] error: not present
Insert the correct printhead. See
.
[Color] printhead #[n] error: please remove
Remove the incorrect printhead and insert a new printhead of the correct
type (color and number). See
[Color] printhead #[n] error: replace
Remove the non-functional printhead and insert a new printhead. See
and
.
[Color] printhead #[n] error: reseat
Remove and reinsert the same printhead, or try cleaning the electrical
connections. If necessary, insert a new printhead. See
recommends reseating or replacing a printhead on page 165
[Color] printhead #[n] out of warranty
The printhead's warranty has ended, because of the length of time it has
been in operation or because of the volume of ink used. See the Legal
Information.
[Color] printhead #[n] warranty warning
The printhead's warranty may be invalidated by the use of the wrong
kind of ink. See the Legal Information.
[Warning] internal failure: Unable to create print
The internal print files are not available in the printer. Load the internal
print files through the Embedded Web Server.
Faulty cartridge. Replace [color] cartridge
Replace the cartridge. See
Remove an ink cartridge on page 60
and
Insert an ink cartridge on page 62
.
IO error
Restart the printer. If the problem persists, contact HP Support. See
IO warning
Try again; if the problem persists, contact HP Support. See
PDL Error: Ink system not ready
Clean the printheads. See
Clean the printheads on page 165
PDL Error: Job clipped
The image is too large for the paper or for the printer. Load larger paper
if possible, or reduce the image size.
ENWW
199
Error messages