HP Designjet Z6200 Photo Printer - Manual (Page 149)

2. Insert the back edge of the absorber into the fitting in the spittoon.
3. Use your thumb to slide the absorber to the back of the fitting in the spittoon.
4. Push down on the tabbed edge until you hear the absorber click into place. Make sure that the top
of the ink absorber is seated flatly and that none of the corners are higher than the plane of the
platen.
5. Press the OK key on the front panel. The printer verifies that the ink absorber is correctly seated. If
the front panel shows a message that it is not seated correctly, remove the ink absorber, insert it
again, and then press the OK key.
Secure disk erase
The printer's hard disk is used as a temporary storage area for print jobs. The Secure Disk Erase facility
can completely erase your information from the hard disk to protect it from unauthorized access. You
can choose to erase particular files, or the whole hard disk.
ENWW Secure disk erase 141
Maintain the printer