HP LaserJet Enterprise 500 Color MFP M575 - Manual (Page 227)

Fax documents by using the Quick Sets feature
Use the Quick Sets feature to quickly access preset job options for sending faxes.
The product administrator can use the HP Embedded Web Server to create Quick Sets, which are then
available in the Quick Sets menu from the control-panel Home screen.
Create a Quick Set
1. Open a Web browser, and then enter the product IP address in the address line.
2. When the HP Embedded Web Server opens, click the Fax tab.
3. Click the Fax Send Setup link from the pane on the left side of the window.
4. In the Quick Sets area, click the Add button, and then follow the on-screen instructions to create
the Quick Set.
Use a predefined Quick Set
1. From the Home screen on the product control panel, touch the Quick Sets button.
NOTE: The product administrator has the option to place Quick Sets directly on the Home
screen. In that case, touch the button for the specific Quick Set instead of touching the Quick Sets
button.
2. Touch the name of the Quick Set that you want to use.
NOTE: Quick Sets are color-coded to correspond with each scan/send feature. For example,
Fax Quick Sets have a red bar behind the Quick Set name, which corresponds with the red bar
behind the name of the Fax feature.
3. Configure any necessary settings, and then touch the Start button to complete the job.
ENWW Fax documents by using the Quick Sets feature 211