HP XP P9500 Storage - Manual (Page 76)

#6
Apply fix pack 3.3.0.3 or later.
#7
Only the NSD (Network Shared Disk) configuration is supported.
Memory and Disk Capacity Requirements
The table below shows the memory requirements for the host.
Memory Requirements
Table 3-4 Memory Requirements for the Host on page 3-10 shows the
memory requirements for the host.
Table 3-4 Memory Requirements for the Host
OS Required memory
AIX 5000 KB + 0.256 KB × number-of-LUs + 1.28 KB × number-of-paths
Disk Capacity Requirements
The following table lists the disk capacity used by the host.
Table 3-5 Disk Capacity Occupied by the Host
Directory Disk capacity requirement
/etc 150 KB
/opt 2 MB
/usr 220 MB
/var p MB #1 +4MB + 2 MB + q MB #2 + 19 MB +
200 KB #3
#1
This value depends on the error log file settings. The maximum is 30,000
MB.
p = (s × m) / 1024 (in MB),
where:
s is the size of the error log file (units: KB, default is 9,900), and
m is the number of error log files (default is 2). The resulting fraction will
be rounded up.
#2
This value depends on the trace file settings. The maximum is 1000 MB.
q = (t × n) / 1024 (in MB),
where:
t is the size of the trace file (units: KB, default is 1,000), and
3-10
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide for AIX ®