HP XP P9500 Storage - Manual (Page 261)

Displayed Item
Description
No
summary
displayed
Summary
displayed
DskName
#1 DskName Storage system name, which identifies the storage system that
is accessed by a path.
A storage system name consists of the following three
elements, separated by periods:
•
Vendor ID: The name of the storage system vendor (for
example, HITACHI).
• Product ID: Indicates the storage system product ID,
emulation type, or model name (for example, OPEN-3).
• Serial number: The serial number of the storage system
(for example, 15001).
You can identify an actual storage system by referencing the
above information from the storage system management
program.
iLU
#1 iLU LU number of the storage system
This number combined with the storage system name (shown
in DskName) identifies the LU that is accessed by a path.
•
For the Lightning 9900V series, Hitachi NSC55, Hitachi
Universal Storage Platform 100, Hitachi Universal Storage
Platform 600, Hitachi Universal Storage Platform 1100, or
HUS VM, indicated by a hexadecimal number. The first two
characters of iLU are the CU number, and the last two
characters are the internal LU number within the CU.
• For XP10000/XP12000, or SVS, indicated by a
hexadecimal number. The first three characters of iLU are
the CU number, and the last two characters are the
internal LU number within the CU. The first character of
the CU number is the value 0.
• For the Thunder 9500V series, Hitachi AMS2000/AMS/
WMS/SMS series, or HUS100 series, indicated by a
decimal number. The entire value of iLU is the internal LU
number within the storage system. You can identify an
actual LU by referencing iLU from the storage system
management program.
• For Universal Storage Platform V/VM series, or Virtual
Storage Platform series indicated by a hexadecimal
number. The first two characters of iLU are the number of
the logical DKC (Disk Controller), the middle two numbers
are the CU number, and the last two characters are the
internal LU number within the CU.
ChaPort
#1 CP Port number of the CHA, which identifies the CHA port that is
mounted on the storage system.
You can identify an actual CHA port by referencing this number
from the storage system management program.
Status Status of the path
•
Online: Online
Command Reference
6-49
Hitachi Dynamic Link Manager User Guide for AIX ®