HP XP P9500 Storage - Manual (Page 111)

HDLM management-target paths, and then re-execute the procedure
of step 6. The hdisk of the boot disk cannot be deleted.
¢
Inheriting the existing hdisk configuration
When the existing hdisk configuration is successfully inherited, the
KAPL10531-I message is displayed.
If the KAPL10531-I message is not displayed, make sure that no
processes, services, file systems, or volume groups are using any
HDLM management-target paths, and then re-execute the procedure
in step 6. The status of the boot disk's hdisk cannot be changed.
7
.
Execute the following command and verify the status of the hdisks
recognized as HDLM-managed devices:
# lsdev -Cc disk
¢
If you attempted to delete an existing hdisk by executing the
dlmrmdev utility, verify that the hdisk has been deleted.
¢
If you attempted to inherit the existing hdisk configuration by
executing the dlmrmdev utility with the -e parameter specified, verify
that the status of the hdisks is Defined.
hdisk0 Available 1S-08-00-8,0 16 Bit LVD SCSI Disk Drive
hdisk1 Available 1S-08-00-9,0 16 Bit LVD SCSI Disk Drive
hdisk2 Available 1S-08-00-10,0 16 Bit LVD SCSI Disk Drive
hdisk3 Defined 1H-08-02 Hitachi Disk Array (Fibre)
hdisk4 Defined 1H-08-02 Hitachi Disk Array (Fibre)
...
8
.
If the license has expired, prepare the license key or license key file.
If the license has not expired, proceed to step 9.
¢
When only the license key has been provided
Create the /var/DLM directory, and then, in this directory, create the
license key file (dlm.lic_key). The following shows an example when
the license key is 123456789ABCDEF:
# mkdir /var/DLM
# echo "123456789ABCDEF" > /var/DLM/dlm.lic_key
¢
When the license key file has been provided
Store the license key file directly under the /var/tmp/ directory by
using the hdlm_license name.
/var/tmp/hdlm_license
Note that the hdlm_license and dlm.lic_key files are deleted after
installation finishes successfully.
9
.
Insert the HDLM DVD-ROM into the DVD-ROM drive, and mount the DVD-
ROM..
If you install HDLM by using a directory to which the DVD-ROM is copied,
you do not have to perform this step.
10
.
For an upgrade installation, execute the following command:
¢
When installing HDLM from the DVD-ROM
Creating an HDLM Environment
3-45
Hitachi Dynamic Link Manager User Guide for AIX ®