HP XP P9500 Storage User Manual
Page 308
Location: U78AA.001.WZSJPKR-P1-C4-T1-W50060E801082EEA0-
L5C000000000000
Description
HDLM detected a path failure.
Probable Causes
HDLM detected a path failure.
Failure Causes
A physical or logical error occurred in the path.
Recommended Actions
Check the path in which the error was detected.
Detail Data
Driver Information.
0001 8000 0017 0000 000A 0005 000B 0000 0000 0000 0000 0000 0000
0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 00
-s
Prevents the confirmation message from being displayed when the utility
is executed.
-o
Displays the current setting information.
-h
Displays the format of the dlmodmset utility.
Examples
In the following example, the utility enables the LUN RESET option:
# /usr/DynamicLinkManager/bin/dlmodmset -r on
KAPL10805-I The setup of the HDLM execution environment ODM will
be changed. Lun Reset = on. Is this OK? [y/n]:y
KAPL10800-I The dlmodmset utility completed normally.
In the following example, the utility displays the current setting information:
# /usr/DynamicLinkManager/bin/dlmodmset -o
Lun Reset : off
Online(E) IO Block : on
7-24
Utility Reference
Hitachi Dynamic Link Manager User Guide for AIX
®