HP XP P9500 Storage - Manual (Page 280)

000004 hdisk1 00001 9500V.0051.0015
000005 hdisk2 00001 9500V.0051.0020
KAPL01001-I The HDLM command completed normally. Operation
name = view, completion time = yyyy/mm/dd hh:mm:ss
#
To Display the Format of the View Operation
-help
Use this parameter to display the view operation format.
Example
The following example shows how to display the format of the view
operation.
# /usr/DynamicLinkManager/bin/dlnkmgr view -help
view:
Format
dlnkmgr view -sys [ -sfunc | -msrv | -adrv | -pdrv | -lic
| -audlog | -lbpathusetimes | -expathusetimes ] [-
t]
dlnkmgr view -path [ -hdev HostDeviceName ] [-stname] [-iem]
[-srt {pn | lu | cp}] [-
hbaportwwn] [-t]
dlnkmgr view -path
-item [pn] [dn] [lu] [cp] [type] [ic] [ie] [dnu]
[hd] [iep]
[hbaportwwn] [vid]
[ -hdev HostDeviceName ] [-stname] [-srt {pn |
lu | cp}] [-t]
dlnkmgr view -path -c [-stname] [-srt {lu | cp}] [-t]
dlnkmgr view -lu [ -hdev HostDeviceName | -pathid
AutoPATH_ID ] [-t]
dlnkmgr view -lu
-item [ [slpr] [vg] [pn] [cp] [clpr] [type]
[ic] [ie] [dnu] [iep]
[dpc] [vid] | all ]
[ -hdev HostDeviceName | -pathid
AutoPATH_ID ] [-t]
dlnkmgr view -lu -c [-t]
dlnkmgr view -lu -c -item [ [slpr] [vg] | all ] [-t]
dlnkmgr view -drv [-t]
dlnkmgr view -hba [-srt pb] [-portwwn] [-t]
dlnkmgr view -cha [-srt cp] [-t]
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
#
add (Adds a Path Dynamically)
The dlnkmgr command's add operation batch-adds paths that are connected
to the host and not configured on the host. You can execute this command
dynamically without any effects on existing paths.
6-68
Command Reference
Hitachi Dynamic Link Manager User Guide for AIX ®