beautypg.com

HP XP P9500 Storage User Manual

Page 325

background image

Legend:

Optional: If a key and its setting are not specified, one of the following

values will be used:

¢

For a new installation
The default value will be used.

¢

For an upgrade installation or re-installation:
The previous setting will be inherited.

Note:

Setting of audit logs is not supported.

#1

Enter one key and one setting per line.

#2

If the value is not of an allowable type, an error will occur.
For details about the functions set by these keys, see

set (Sets Up the

Operating Environment) on page 6-17

.

#3

You can specify this key only in the following cases:

¢

For a new installation:
When on is specified for the auto_failback key in the installation

information settings file

¢

For an upgrade installation or re-installation:
When on is specified for the auto_failback key in the installation

information settings file, or when automatic failback is enabled in the

installation pre-settings

#4

If you want to enable intermittent error monitoring, specify this key after

specifying the auto_failback and auto_failback_interval keys.

#5

The checking interval can be set regardless of whether the dynamic I/O

path control function is enabled or disabled.

The following shows an example of an edited installation information settings

file.

[INSTALLATION_SETTINGS]

installfile_location=/dev/cd0

logdir=/var/tmp

licensekeyfile=/var/tmp/hdlm_license

licensekey=/var/DLM/dlm.lic_key

driver_config=y

restart=n

[DISK_DEFAULT_SETTINGS]

reserve_policy=PR_exclusive

[ODM_SETTINGS]

odm_lun_reset=off

Utility Reference

7-41

Hitachi Dynamic Link Manager User Guide for AIX

®

This manual is related to the following products: