HP XP P9500 Storage - Manual (Page 323)

Key name #1 Description #2
Necessity of
definition
Maxim
um
numbe
r of
charac
ters
New
installa
tion
Upgrad
e
installa
tion or
re-
installa
tion
You can set a level from 0 to 4. The
default is 3.
error_log_size Set the size of the error log files
(dlmmgr[1-16].log) in kilobytes.
You can set a size from 100 to
2000000. The default is 9900.
Optional Optional 7
error_log_number Set the number of error log files
(dlmmgr[1-16].log).
You can set a value from 2 to 16.
The default is 2.
Optional Optional 2
trace_level Set the trace output level.
You can set a level from 0 to 4. The
default is 0.
Optional Optional 1
trace_file_size Set the size of the trace files
(hdlmtr[1-64].log) in kilobytes.
You can set a size from 100 to
16000. The default is 1000.
Optional Optional 5
trace_file_number Set the number of trace files
(hdlmtr[1-64].log).
You can set a value from 2 to 64.
The default is 4.
Optional Optional 2
path_health_check Specify one of the following values
to indicate whether to enable or
disable the path health check
function:
on: Enabled (default)
off: Disabled
Optional Optional 3
path_health_check_
interval Specify the interval in minutes at
which the path health check is
performed.
You can specify a check interval
from 1 to 1440. The default is 30.
Optional Optional 4
auto_failback Specify one of the following values
to indicate whether to enable or
disable the automatic failback
function for failed paths:
on: Enabled (default)
Optional Optional 3
Utility Reference
7-39
Hitachi Dynamic Link Manager User Guide for AIX ®