HP XP P9500 Storage - Manual (Page 326)

odm_online_e_io_block=off
odm_npiv_option=off
odm_os_error_log=off
[ENVIRONMENT_SETTINGS]
load_balance=on
load_balance_type=exlio
load_balance_same_path_use_times=20
lbex_usetimes_limit=100
error_log_level=3
error_log_size=9900
error_log_number=2
trace_level=0
trace_file_size=1000
trace_file_number=4
path_health_check=on
path_health_check_interval=30
auto_failback=on
auto_failback_interval=60
intermittent_error_monitor=off
# intermittent_error_monitor_interval=210
# intermittent_error_monitor_number=3
dynamic_io_path_control=off
dynamic_io_path_control_interval=10
Note:
¢
If a hash mark (#) is placed at the beginning of a line in the
installation information settings file, that line is assumed to be a
comment.
¢
If you do not want to specify a key, enter a hash mark (#) at the
beginning of the line that defines that key.
Log file
A log file (installhdlm.log) is output after an unattended installation of
HDLM.
The following explains the installhdlm.log file.
• installhdlm.log is created in the folder whose path is specified by the
logdir key in the installation-information settings file. Do not share the
log file output directory among the hosts on which unattended installation
is being performed. If no value is specified for logdir key, the log file is
output to the /var/tmp directory.
• If installhdlm.log already exists, log information is added to this log
file. For details about the unused capacity required for the log output
directory, see Performing an Unattended Installation of HDLM on page
3-65 .
Note
• Note that installhdlm.log is not deleted after HDLM is removed.
Therefore, delete the original installhdlm.log manually if it is no longer
required.
7-42
Utility Reference
Hitachi Dynamic Link Manager User Guide for AIX ®