HP XP P9500 Storage - Manual (Page 224)

Format
To Place Paths Online
/usr/DynamicLinkManager/bin/dlnkmgr online
[-path]
[-hba HBA-adapter-number.bus-number-or-adapter-type.adapter-
number
|-hbaid HBA-port-ID
|-cha -pathid AutoPATH_ID
|-chaid CHA-port-ID
|-pathid AutoPATH_ID
|-hdev host-device-name [-ospathid OS-management-path-ID]
|-hapath [-lu -pathid AutoPATH_ID]
|-dfha [-lu -pathid AutoPATH_ID]]
[-s]
To Display the Format of the Online Operation
/usr/DynamicLinkManager/bin/dlnkmgr online -help
Parameters
To Place Paths Online
-path
Indicates that the target of the operation is a path managed by HDLM.
This parameter is optional because online is always used for paths, so it
is assumed.
Specify the paths to be placed online by using the -hba, -hbaid, -cha, -
chaid, -pathid, or -hdev parameter. If you do not specify any of these
parameters, the command will place all the offline paths online. If there is
a path that cannot be placed online, a message asks whether you would
like to continue processing. To ignore the offline path that cannot be
placed online and to continue processing, enter y. To stop the processing,
enter n.
-hba HBA-adapter-number.bus-number
Or
-hba adapter-type.adapter-number
Use this parameter to place online, at one time, all the paths that pass
through a specific HBA port. The command will place online all the paths
connected to the HBA port that has the specified HBA-adapter-
number.bus-number or adapter-type.adapter-number.
Specify the HBA adapter number and bus number, or adapter type and
adapter number, of the target HBA port: the numbers are found in the
PathName field displayed using the view operation. Enter a period
6-12
Command Reference
Hitachi Dynamic Link Manager User Guide for AIX ®