HP XP P9500 Storage - Manual (Page 327)

• If the installhdlm.log file cannot be output for some reason, such as
there being insufficient capacity on the output disk, a message is output
to this effect immediately before the installhdlm utility ends.
installux.sh Utility for HDLM Common Installer
This utility determines what OS HDLM will be installed on, and installs the
corresponding version of HDLM from the DVD-ROM. This utility can also
perform unattended installations via a parameter specification.
For details about how to use this utility to install HDLM, see Performing a New
Installation of HDLM on page 3-25 , Performing an Upgrade Installation or Re-
installation of HDLM on page 3-37 , or Performing an Unattended Installation
of HDLM on page 3-65 .
Format
/directory-in-which-the-DVD-ROM-is-mounted-or-copied/installux.sh [ -f
installation-information-settings-file-name | -h]
Parameters
-f installation-information-settings-file-name
Defines the information needed for an unattended installation.
For details about installation-information settings files, see
Items To Be
Defined in an installation-information Settings File on page 7-32 .
-h
Displays the format of the installux.sh utility.
Log file
The installux.sh utility outputs execution information to the log file /var/
tmp/hdlm_installux_sh.log. If the hdlm_installux_sh.log log file already
exists, the utility appends execution information onto the end of the log file.
If the size of the log file is equal to or greater than 1 MB when the utility is
executed, the log file is renamed to hdlm_installux_sh2.log, and a new log
file is created and named hdlm_installux_sh.log, to which the execution
information is output.
Note
The hdlm_installux_sh.log and hdlm_installux_sh2.log log files are not
deleted when HDLM is removed. Manually delete the log files, if they are no
longer required.
Utility Reference
7-43
Hitachi Dynamic Link Manager User Guide for AIX ®