HP Surestore 2.28 Tape Library - Manual (Page 77)

4-33
Library Operation
Retrieving Performance Information
L
ib
r
ar
y
O
p
er
at
io
n
DRIVE LOADS * DRIVE 1 Number of tape cartridge loads for drive 1.
DRIVE 2 Number of tape cartridge loads for drive 2.
DRIVE 3 Number of tape cartridge loads for drive 3
(four drive library only).
DRIVE 4 Number of tape cartridge loads for drive 4
(four drive library only).
DRIVE FW* D1 REVISION# Firmware revision of drive 1.
D2 REVISION# Firmware revision of drive 2.
D3 REVISION# Firmware revision of drive 3 (four drive
library only).
D4 REVISION# Firmware revision of drive 4 (four drive
library only).
INTERFACE FW* BUS NUM = Press NEXT or PREV to display the interface
bus number to select, then view the following:
FAST WIDE SCSIFast wide interface bus type.
8052 CKSUM #Checksum of the 8052 code.
COBRA REV #Revision of the cobra chip on
the interface.
HARD ERROR *
Log entries are described after “RECOVERY
ERROR” in this table.
Log of unrecoverable errors and commands
that did not successfully complete. Returns
either “NO HARD ENTRIES” or “ENTRY #”.
(There may be multiple hard error numbers.)
Press
ENTER to view the log for the currently
displayed error, or press NEXT to select the
next error.
Table 4-9 Information Logs (Continued)
Log Name Displays