HP Surestore 2.28 Tape Library - Manual (Page 53)

4-9
Library Operation
Specifying SCSI Addresses
L
ib
r
ar
y
O
p
er
at
io
n
Specifying SCSI Addresses
1 2 3 4 ➔ ADMIN* ➔ PSWD 000-000-000 ➔ SCSI IDs*
NOTE The library has a Fast/Wide SCSI interface. SCSI addresses can be set from:
• 0 to 7 on a DLT4000-based library
• 0 to 15 on a DLT7000-based library
If connecting to a narrow host, use only addresses 0 to 7.
Table 4-1 SCSI ID Options
Table 4-2 Default SCSI Address Settings
Option Purpose Explained in
SET IDs* Assigns individual SCSI IDs to each
drive and the robotics controller. “Setting the SCSI Addresses” on
page 4-10
VIEW IDs* Displays the current drive and
robotics controller settings. “Viewing the Current SCSI
Addresses” on page 4-10
SET LIB BUS* Specifies single-ended or
differential for the robotics
controller. “Setting the Robotics Controller
Bus Type” on page 4-13
DEVICE SCSI ID BUS #
LIB 6 Bus 0
DRV 1 5 Bus 1
DRV 2 4 Bus 2
DRV 3 (four-drive models only) 3 Bus 3
DRV 4 (four-drive models only) 2 Bus 4