HP Surestore 2.28 Tape Library - Manual (Page 49)

4-5
Library Operation
Understanding the Display Window
L
ib
r
ar
y
O
p
er
at
io
n
Control Panel Options
Press PREV or NEXT while the library is in the “ready” state to display first
level options. Access second level options from ADMIN* (second level
options require a password; see “Entering the Administration Menu
Password” on page 4-7).
An asterisk (*) indicates that the option has multiple selections.
When a menu selection is flashing, press ENTER to select the option or display
the option’s selections. Press PREV or NEXT to display other available options.
First Level Options
Second Level Options
LOAD* Loads tape cartridges into the library storage slots.
EJECT* Ejects tape cartridges stored inside the library.
RELEASE DOOR Allows the bulk load access door to be unlocked.
ADMIN* Accesses second-level options.
INFO* Displays performance information stored in the
library.
TEST* Runs internal library tests.
CONFIG* Customizes the way the library functions.
CLEAN DRIVES* Displays the drive numbers to clean.
OVERRIDE DOOR* Opens door when tapes are in drives.
SCSI IDs* Sets the SCSI addresses for the robotics controller
and the library drive mechanisms.
ONLINE REPAIR* Deactivates a drive for replacement.