HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 51)

Domain management 51
5. Click OK to save the information and return to the main SNMP configuration screen, or continue and
select trap categories or trap severities.
If you enter information that is invalid (for example, if you use a space in the Destination name), a red
box appears around that field. Mouse over the box to see information regarding the error.
Select trap categories
Selecting a trap category allows multiple traps to be enabled or disabled as a group.
To select VC-Enet or VC-FC trap categories, click the checkbox. To select a VCM trap category, do one of
the following:
• Highlight the item, and then click the right arrow.
• Highlight the item, and then drag and drop it into the right window.
Select trap severities
To select a trap severity, do one of the following:
• Highlight the item, and then click the right arrow.
• Highlight the item, and then drag and drop it into the right window.
For a definition of trap severities, see "Trap severities (on page 48)." When a trap is received with the
severity listed in the right window, it is sent to the trap destination.
If you do not have the required privileges to select a category, that section is disabled. For a listing of trap
categories and the required administrative privileges, see "Trap categories and required administrative
privileges (on page 48)."
SNMP Configuration (VC-FC)
By enabling SNMP for VC-FC modules, network management systems can monitor the VC-FC modules in
the domain for events, such as warnings and errors, that might require corrective actions. The user must
have storage or domain administrator privileges to administer SNMP FC settings.